Electrical Power Analyzer
CVM-k2
  • Available in 2 class: 0.2 and 0.5
  • Using RS-485 Modbus RTU as communication
  • Made base on standard IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-11, IEC 61000-4-4, IEC 61000-4-5
  • Using 4 system quadrant
  • Working frequency: 50 Hz or 60 Hz
  • Auto Scale
  • Could display graphic and diagram
  • Modular type
  • Could read more than 500 parameters
CVM-k2 Module
  • Additional module that could function as digital input/output or analog input/output (depend on which module)
  • SD memory card and Ethernet port
  • Also could function as relay output
  • Reliable with Power Studio and Scada system
CVM NRG 96
  • Class 0.5
  • Using RS-485 Modbus RTU as communication
  • Made base on standard IEC 664, VDE 0110, UL 94, IEC 801, IEC 348, IEC 571-1, EN 61000-6-3, EN 61000-6-1, EN 61010-1
  • Have alarm feature
  • Realibale in Medium Voltage and Low Voltage
  • Using 4 system quadrant
  • Could display many parameters
  • Reliable with Power Studio and Scada system
  • Can measure THD (V,A)
CVM 144 & CVM 96
  • Made base on standard IEC 664, VDE 0110, UL 94, IEC 801, IEC 348, IEC 571-1, EN 61000-6-3, EN 61000-6-1, EN 61010-1
  • Using 2 system quadrant
  • Using RS-485, RS-232 Modbus RTU as communication
  • Class 0.5
  • Have flashing LED to detect incorrect connection detection
  • Realibale in Medium Voltage and Low Voltage
  • Can measure THD (V,A)

Contact Us


Please call us for any inquiries :

T. +62-21-386 6228

F. +62-21-345 6879

E. This email address is being protected from spambots. You need JavaScript enabled to view it.

Postal and Mail Contact

Jl. Hayam Wuruk No. 4 E-G-I

Jakarta Pusat 10120

Indonesia